- Store
- >
- Pebeo Fabric Paint
- >
- Pebeo 3D Liner Black
Pebeo 3D Liner Black
Dimensional paint for most fabrics Properties
QUALITY: dimensional fabric paint in a 20 ml tube for application on most light and dark fabrics. No fixing required. DRYING: Air dry in 12 hours SURFACES: all types of prewashed fine or thick, light or dark fabrics, natural or synthetic fibers. Ready-to-use colours.
Brod’line effect: expands after ironing, 5 colours -
FIXING: not required CARING (decorated fabric): the colours resist machine washing and hand washing at 40°C (100°F), 72 hours after application.
TOOL CLEANING: Soapy water.
PACKAGING: 20 ml tube with nozzle Protect from freezing Applications - A range with a professional finish to customize and decorate fabrics. - A formula without fixing that is guaranteed to be wash resistant. - Fabrics keep their suppleness even after several washes. The metal tube with nozzle facilitates handling and allows full use of the paint. It prevents air bubbles therefore your work will always be clean.
Use Setacolor 3D to personalize your clothes and fabrics. Apply with the nozzle to draw thick or fine lines, a brush, a painting knife or a sponge on prewashed fabrics.
Allow to dry 12 hours (increase the drying time if ambient humidity is over 80%). Fabrics resist machine washing and hand washing at 40°C (100°F), 72 hours after application. Recommendation: wash inside out and iron on the reverse side of the decorated fabric. Use a short wash cycle; do not use softener, air dry.
For the Brod’line effect: colours expand with heat rendering a velvety flocked finish. After application, allow to dry 6 hours. Iron on the reverse side of the decorated fabric for 5 minutes: the colours will expand! Follow the same washing instructions as for the other products in the range. Recommandations This information is submitted for information purposes only. It is always advisable to conduct preliminary tests on the selected surface before beginning the project. It is always advisable to conduct preliminary tests on the selected media before starting a job. For more information on the safety and handling conditions of these products, refer to the Safety Data Sheet available on our website: http://en.pebeo.com/Pebeo/Safety-Data-Sheet. Water-based Wash resistant at 40°C (100°F), 72 hours after application Iron 5 minutes on cotton position to obtain the Brod’line volume